Piercing jewelry has more than one measurement. Gauge is the thickness that passes through the piercing. Post length is the wearable distance between the ends. Ring diameter is usually measured across the inside of the ring.

Before ordering: get the gauge, wearable length or inner diameter, connection type and manufacturer from your piercer. “A helix stud” or “a nose hoop” is not a complete size.

Understand the three measurements

What to measure
Measurement What it describes Common mistake
Gauge The thickness of the post or ring passing through tissue. Assuming a larger gauge number means thicker jewelry.
Wearable length The part of a post available between its ends. Including the disc, ball or decorative top in the measurement.
Inner diameter The clear distance across the inside of a ring. Measuring across the outside and buying a ring that fits too tightly.

In BodyCandy’s chart below, lower gauge numbers indicate thicker jewelry. Millimeter descriptions avoid some confusion, but confirm the manufacturer’s measurements and conventions.

A small gauge reference

Retailer BodyCandy lists these gauge-to-millimeter sizes in its jewelry sizing guide:

BodyCandy gauge sizes—not placement recommendations
Gauge Approximate thickness
20g 0.8 mm
18g 1.0 mm
16g 1.2 mm
14g 1.6 mm

This reference does not tell you which size belongs in your piercing. Retail rounding and gauge conventions can vary. Use the specification for the actual piece and have your existing size checked if you are unsure.

Why the same placement needs different sizes

Two people with helix piercings can need different post lengths. Tissue thickness, placement angle, end shape and swelling all affect fit. A ring must also reach around the anatomy without pulling the channel out of position.

A starter post may deliberately have extra length. Once swelling settles, your piercer may recommend a shorter one. Copying the starter length for every future order can leave jewelry too long; choosing the shortest possible post can create pressure.

Do not remove jewelry from a healing piercing to measure it. Ask the studio to check and write down the dimensions. Never force thicker jewelry through resistance to see whether it fits.

Record the connection as well

A decorative end also needs to match its post. Equal gauge does not establish that two threaded pieces have the same thread size, or that a threadless pin will be held correctly by another brand’s post.

Your jewelry record: placement; manufacturer; material; gauge or thickness; wearable length or inner diameter; connection; decorative-end size. Ask the studio to include the measurements on your receipt.

Keep a clear distinction between the size worn during initial swelling and any later downsize. If you want a new style, bring the record to the piercer and ask whether the proposed design needs a different fit.

See how connections differ and what changes when moving from a stud to a hoop.

Not medical advice. This article is general information about body piercing. It is not medical advice and not a substitute for care from a qualified piercer or a clinician. Healing times and reactions vary from person to person. If a piercing shows spreading redness, swelling, heat, pus or a fever, or you are unsure, see a healthcare professional rather than treating it at home.